** Peeling off protection sheet
must be slow as it will generate static charge and attract flying
dust. To disperse off the static charge, spray mild glass cleaner mix
with 70% water.
** Spray glass cleaner (mix 30%
glass cleaner with 70% water) on the glass surface and film glue layer
before attach. Adjust the film to the right alignment before squeeze
out the water.
** Use hot gun or hot blower to
dry up the edge of film after installation. Distance of Hot Gun should
be 6 inches and above, else it will deform the film.
Training at Customer Site.
STEC does provide
installation training at cost upon request for customer who ordered
above 10 rolls of films.
Training in
Thailand - Perfect Power (21st August 09)
